Control Devices for Metering and Batching Equipment
TenzoTEK-03 Metering Converter
TenzoTEK-03 metering converter is aimed for static weighing within truck, railway, platform, hopper scales as well as batching for various companies: metallurgy, mining, fuel and power, chemical etc. as a part of automated control systems (PCS) within flow metering systems.
Operation Features
- Indicating zero weighing on 6-digit seven segment display
- Indicating gross weight, net weight and tare
- Zero weight alignment
- Expanded temperature ranges
- Storing and displaying outcomes of several weighing sessions
- Monitoring the sensor regarding of power loss / short circuit, overcurrent of one parallel connected sensor (number of sensors is setup by the operator)
|
Basic Features
|
Relative error in weight metering out of the maximum weighing limit (NPV), %
|
±0.01
|
|
Supply voltage of alternate current with frequency 50±0.5, V
|
from 187 to 242
|
|
Maximum power demand, W
|
15
|
|
Ambient temperature, ºС
|
from -40 to +50
|
|
Class of dust and moisture protection
|
IP54
|
|
|
TenzoTEK-03 Performs the Following Functions as per In-Built Algorithm:
- Unit indication: ">0<", "gross weight", "net weight", "stabilization mode", weight metering units "kg/t", exceeding weight limit "excessive weight"
- Conversion of analogue signal from strain measuring bridge into current weight value
- Measuring channel calibration
- Measuring channel linearization
- Filtering signal from measuring channel within setup ranges
- Measuring current weight
- Zero setting and scales tare offset
- Exchanging data with the upper level computer through RS-485, RS-232 interfaces, protocol Modbus RTU
- keeping archive data up to 100 last measurement sessions on measuring results, giving number number, date and time of weight measurement
|
|
Design
TenzoTEK-03 is designed as a stationary unit in plastic casing and it consists of the following modules:
- metering module, aimed for metering the signals from the sensor, processing it and transferring weight data to the upper level computer
- display and keyboard, aimed to display weight data, emergency, selection and setup of parameters
- connection module aimed to connect the sensor, power supply and the upper level computer
Versions of TenzoTEK-03:
- TenzoTEK-03-I - complete version
- TenzoTEK-03-R - with no display and keyboard, operation only through RS-232/485 interface
Dimensions: 235mm×160mm×72mm (length, width, height)
Weight of TenzoTEK-03 without package: does not exceed 4 kg
|
|
Operation Limits
|
Feature
|
Acceptable value
|
|
Min
|
Nom
|
Max
|
|
General Features
|
|
Ambient temperature, °С
|
-40
|
-
|
+50
|
|
Air pressure, kPa
|
84
|
-
|
107
|
|
Relative humidity, %
|
35
|
-
|
95 |
|
Parameters of Analogue Strain Metering Channel
|
|
Number of metering channels. pieces
|
-
|
-
|
1
|
|
Load resistance (from 1 to 4 sensors connected in parallel), Ohm
|
95
|
380
|
-
|
|
Incoming AC voltage, V
|
±4.7
|
±5.0
|
±5.3
|
|