NKU 01 Low Voltage Packaged Unit

 
 

NKU low voltage packaged unit is aimed to control and protect from 1 up to 6 three phase asynchronous motors, being an integral part of various equipment: electric drives for pipe fittings, pumps, compressors, fans, conveyors etc.


 

Functions

  • Preset rotation direction for motor regardless from the sequence of input circuit phases
  • All standard types of protection for the motor
  • Regular check up if the motor is available by the actuator
  • Remote control over motor insulation resistance
  • Linking with the upper level computer through RS-485 interface with Modbus RTU and Profibus DP protocols
  • Shutting / opening the stop valve flow section upon the operator’s instruction
  • Motor automatic switch off when the stop fitting reaches end positions
  • Motor automatic switch off when the preset loads are overrun at the output element
  • Notice on motor automatic switch off is shown on the operator’s control panel
  • Local control (by local control panel) or keyboard

 

Technical Parameters

 Supply voltage, V

380 ± 1.5...15%

 Frequency, Hz

50 ± 1

 Protection for NKU-X-XX

IP43 (IP54 to be ordered individually)

 Wattage, kW (if supplied with BUZ-03M)

from 0.37 to 250

 Wattage, kW (if supplied with BUZ-05)

from 1.5 to 5.5

 Weight of NKU 01-XX-XX, kg, not exceeding

70

 Weight of NKU 01-XX-XX-XX-XX, kg, not exceeding

120

 Weight of NKU 01-XX-XX-XX-XX-XX-XX, kg, not exceeding

180

 Dimensions (width x depth x height), NKU 01-XX-XX (from 1 to 2 motors), mm

600х350х800

 Dimensions (width x depth x height), NKU 01-XX-XX-XX-XX (from 3 to 4 motors), mm

600х350х800

 Dimensions (width x depth x height), NKU 01-XX-XX-XX-XX-XX-XX (from 5 to 6 motors), mm

600х350х2000