Slides

 

Hopper gates, gate turn valve, flap gate manufactured by NPP Tomsk Electronic Company are aimed for discharge of hoppers, material stream separation, emergency closing and routine maitenance.

Batchers have the following design features and advantages: 

  • Easy operation and maitenence
  • Components by leading international manufacturers, tested during operation
  • Easy control
  • Design as per Customer's requirements
 
 
Slide Gate

Slide gates are aimed for handling bulk materials with grain size up to 50mm.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 50

 Temperature of materials, ºС, not more

+200

 Humidity, %, not more

15

 Angle of materials natural slope, degrees

20...55

Technical Parameters

 Section of hopper lower flange

round / square

 Control of gate actuator

manual (screw-nut),
electric mechanical,
pneumatic, hydraulic

Ambient class of gate as per GOST 15150-69: UHL2, -40...+40 ºС

 


Slide Pin Gate

Slide pin gates are aimed for handling bulk materials with grain size up to 300 mm.
Design:

- front
- lateral (left, right)

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 300

 Temperature of materials, ºС, not more

+200

 Humidity, %, not more

15

 Angle of materials natural slope, degrees

20...55

Technical Parameters

 Section of hopper lower flange

round / square

 Control of gate actuator

manual (screw-nut),
electric mechanical,
pneumatic, hydraulic

Ambient class of gate as per GOST 15150-69: UHL2, -40... +40 ºС

 


Sector Gate

Sector gates are used to stop flows of bulk materials, being a part of storage and weigh hoppers.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 300

 Temperature of materials, ºС, not more

+200

 Humidity, %, not more

15

Technical Parameters

 Gap section, mm

from 200х200

 Discharge unit

one sector, two sector

 Control of gate actuator

electric mechanical,
pneumatic, manual

Ambient class of gate as per GOST 15150-69: UHL2, -40...+40 ºС

 


Gate Turn Valve

Gate turn valves are used for closing flows of bulk materials, being a part of storage and weigh hoppers.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 40

 Temperature of materials, °С, not more

+200

 Humidity, %, not more

15

Technical Parameters

 Nominal diameter of pass orifice, mm

150; 200; 260

 Control of gate actuator

electric mechanical,
pneumatic

Ambient class of gate as per GOST 15150-69: UHL2, -40...+40 ºС

 


Flap Gate

Flap gates are used to redirect the material flow.
The flap gate is designed in such way that it can be operated automatically within some process line and manually from local control panel (PMU).

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 300

 Temperature of materials, ºС, not more

+200

 Humidity, %, not more

15

Technical Parameters

 Gap section, mm

from 200х200

 Time for gate turining for 70 degrees, sec

from 3

 Control of gate actuator

electric mechanical,
pneumatic, manual

Ambient class of gate as per GOST 15150-69: UHL2, -40...+40 ºС