| |
|
Carrier, loading mold manufactured by SME TEC Ltd., are aimed to be built into process lines dealing with continuous feeding of bulk materials of various properties (grain size, abrasiveness, flowability etc).
Our company also offers manufacturing and supplying matching and intermediate steel structures (charging pipes, adapting flanges etc), fencing - to be mounted to the floor and built into the equipment.
|
| |
|
|
| |
 | | | |
|
Single rail carrier is aimed for transportation of bulk materials within process lines.
Physical and Mechanical Properties of Materials
|
Bulk weight, t/m3
|
from 0.1 to 6.0
|
|
Grain size, mm
|
from 0.1 to 300
|
|
Temperature of material, ºС, not more
|
+200
|
|
Humidity, %, not more
|
15
|
|
Angle of materials natural slope, degrees
|
20...55
|
Technical Parameters
|
Gap section, mm
|
from 200х200
|
|
Time for sector turning for 70 degrees, s
|
from 3
|
|
Discharge unit
|
one sector, two sector
|
|
Control of sector actuator
|
electric mechanical, pneumatic
|
Ambient class of the carrier as per GOST 15150-69: UHL2, -40...+40 ºС
|
|
|
Loading mold of flap type is aimed for loading bulk materials into storage hoppers, it is transported by lifting devices, discharged through a bottom flap when installed on a receiving hopper.
Physical and Mechanical Properties of Materials
|
Bulk weight, t/m3
|
from 0.1 to 6.0
|
|
Grain size, mm
|
from 0.1 to 100
|
|
Temperature of material, ºС, not more
|
+200
|
|
Humidity, %, not more
|
15
|
|
Angle of materials natural slope, degrees
|
20...55
|
Technical Parameters
|
Bin volume, m3
|
from 0.5
|
|
Lifting capacity, kg
|
from 50 to 5000
|
Ambient class of the mold as per GOST 15150-69: UHL2, -40...+40 ºС
|
|
|
Flow divider is used to separate 10-20% out of the main flow of bulk materials. Flow divider can be operated automatically within a process line or manually from a local control panel (PMU).
Physical and Mechanical Properties of Materials
|
Bulk weight, t/m3
|
from 0.1 to 6.0
|
|
Grain size, mm
|
from 0.1 to 50
|
|
Temperature of material, ºС, not more
|
+200
|
|
Humidity, %, not more
|
15
|
Technical Parameters
|
Flow rate, m3/h
|
up to 4
|
|
Control of flow divider actuator
|
electric mechanical, pneumatic
|
Ambient class of the flow divider as per GOST 15150-69: UHL2, -40...+40 ºС
|
|
|
Sampler is used for bulk materials sampling for metallurgical, cement, mining, refinery, construction and other branches of industry when testing physical, mechanical and chemical properties of the materials.
Physical and Mechanical Properties of Materials
|
Bulk weight, t/m3
|
from 0.1 to 5.0
|
|
Grain size, mm
|
from 0.1 to 150
|
|
Temperature of material, ºС, not more
|
+600
|
|
Humidity, %, not more
|
15
|
Technical Parameters
|
Ladle volume, m3
|
from 0.05
|
|
Speed of ladle movement, m/s
|
1.0
|
|
Distance between drive and reversible drum, mm
|
from 500
|
Ambient class of the sampler as per GOST 15150-69: UHL2, -40...+40 ºС
|
|
|
TTPS Transportation Car with Lifting Table TTPS transportation car is aimed to transport discharge mold filled with bulk materials within process lines.
The mold is loaded through the upper sealed gate, opened when the table is lifted. The discharge goes through the lower gate when the mold is above the receiving bin by means of loading crane devices.
Physical and Mechanical Properties of Materials
|
Bulk weight, t/m3
|
from 0.1 to 6.0
|
|
Grain size, mm
|
from 100
|
|
Temperature of materials, ºС, not more
|
+200
|
|
Angle of materials natural slope, degrees
|
20...55
|
Technical Parameters*
|
Mold volume, m3
|
up to 1.5
|
|
Car movement rate, m/s
|
up to 0.5
|
|
Table lifting (travel), mm
|
up to 300
|
|
Table lifting capacity, t
|
up to 5.0
|
|
Capacity of car moving actuator, kW
|
3.0
|
|
Capacity of table lifting actuator, kW
|
up to 7.5
|
Ambient class of the sampler as per GOST 15150-69: UHL2, -40...+40 ºС
* - Given technical parameters of the unit can be alternated as per Customer's requirements. |
|
|
|
