Nonstandard Equipment

 

Carrier, loading mold manufactured by SME TEC Ltd., are aimed to be built into process lines dealing with continuous feeding of bulk materials of various properties (grain size, abrasiveness, flowability etc).

Our company also offers manufacturing and supplying matching and intermediate steel structures (charging pipes, adapting flanges etc), fencing - to be mounted to the floor and built into the equipment.

 
 
Single Rail Carrier

Single rail carrier is aimed for transportation of bulk materials within process lines.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 300

 Temperature of material, ºС, not more

+200

 Humidity, %, not more

15

 Angle of materials natural slope, degrees

20...55

Technical Parameters

 Gap section, mm

from 200х200

 Time for sector turning for 70 degrees, s

from 3

 Discharge unit

one sector, two sector

 Control of sector actuator

electric mechanical, pneumatic

Ambient class of the carrier as per GOST 15150-69: UHL2, -40...+40 ºС

 


Loading Mold

Loading mold of flap type is aimed for loading bulk materials into storage hoppers, it is transported by lifting devices, discharged through a bottom flap when installed on a receiving hopper.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 100

 Temperature of material, ºС, not more

+200

 Humidity, %, not more

15

 Angle of materials natural slope, degrees

20...55

Technical Parameters

 Bin volume, m3

from 0.5

 Lifting capacity, kg

from 50 to 5000

Ambient class of the mold as per GOST 15150-69: UHL2, -40...+40 ºС

 


Flow Divider

Flow divider is used to separate 10-20% out of the main flow of bulk materials. Flow divider can be operated automatically within a process line or manually from a local control panel (PMU).

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 0.1 to 50

 Temperature of material, ºС, not more

+200

 Humidity, %, not more

15

Technical Parameters

 Flow rate, m3/h

up to 4

 Control of flow divider actuator

electric mechanical, pneumatic

Ambient class of the flow divider as per GOST 15150-69: UHL2, -40...+40 ºС

 


Sampler

Sampler is used for bulk materials sampling for metallurgical, cement, mining, refinery, construction and other branches of industry when testing physical, mechanical and chemical properties of the materials.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 5.0

 Grain size, mm

from 0.1 to 150

 Temperature of material, ºС, not more

+600

 Humidity, %, not more

15

Technical Parameters

 Ladle volume, m3

from 0.05

 Speed of ladle movement, m/s

1.0

 Distance between drive and reversible drum, mm

from 500

Ambient class of the sampler as per GOST 15150-69: UHL2, -40...+40 ºС

 


TTPS Transportation Car with Lifting Table

TTPS transportation car is aimed to transport discharge mold filled with bulk materials within process lines.
The mold is loaded through the upper sealed gate, opened when the table is lifted. The discharge goes through the lower gate when the mold is above the receiving bin by means of loading crane devices.

Physical and Mechanical Properties of Materials

 Bulk weight, t/m3

from 0.1 to 6.0

 Grain size, mm

from 100

 Temperature of materials, ºС, not more

+200

 Angle of materials natural slope, degrees

20...55

Technical Parameters*

 Mold volume, m3

up to 1.5

 Car movement rate, m/s

up to 0.5

 Table lifting (travel), mm

up to 300

 Table lifting capacity, t

up to 5.0

 Capacity of car moving actuator, kW

3.0

 Capacity of table lifting actuator, kW

up to 7.5

Ambient class of the sampler as per GOST 15150-69: UHL2, -40...+40 ºС

* - Given technical parameters of the unit can be alternated as per Customer's requirements.